ZM - 5860 Station

Avatar utente
ReworkProUK
Junior Member
Junior Member
Messaggi: 27
Iscritto il: lun 05 dic, 2011 1:48 pm
Località: U.K
Contatta:

ZM - 5860 Station

Messaggioda ReworkProUK » dom 12 feb, 2012 4:50 am

ZhuoMao ZM-R5860 BGA Rework Station
The ZhuoMao ZM-R5860 machine uses touch-screen interface and PLC control to show the three temperature graphs at any time.
The hot air nozzle can rotate 360° freely and it's easy to replace. Offering BGA nozzles of different sizes for you to replace easily.
 It can save 1 to 100 groups of graph parameters at one time.
It can analyze the graphs and change the settings at any time on the touch screen.
Nozzles of special requirements are customizable.
 
 
 
ZhuoMao ZM-R5860 BGA Rework Station Features
 
Adopt liner slide which makes X,Y,Z axis all can do precision adjustment or fast positioning,
with high positioning accuracy and fast maneuverability
high definition touch screen , PCL control, can save multiple groups profile,
password protection and modify function, and can save multiple groups profile,
equipped with instant temperature curve analysis functionï¼›
There are 3 independent heating areas from top to bottom. The 1st and 2nd are hot-air heaters,
the 3rd is IR preheating, temperature controlled within ±3 °; Top heater can be adjusted freely,
 second heater can be adjusted up and down,
top and bottom temperature can control many groups and sections of temperature parameters at the same time
 the third IR heater can be adjusted the power consumption
Offer all kinds of hot-air nozzle, it can rotate 360°ï¼›With magnet,
easy to install and change, customized is available; Bottom IR heater ensure an even heat for PCB board;
Choose imported high-precision K-type thermocouple,
closed loop control and automatic temperature compensation system,
combined PLC module for the precision control of temperature.
Use a V-groove equipped with a flexible fixture for PCB positioning to protect the PCB from deformation when heated or cooled,
and it can rework for any BGA package size;
powerful cross-flow fan rapidly cool the PCB board to improve efficiency
 Also built-in vacuum pump and external vacuum suction pen, pick up the chips rapidly
After finishing desoldering & soldering, There is an alarming and alarming in advance
CE certificate, with emergency stop and Automatic power-off protection device when abnormal accident happens
with a double over-heating protection control
 
 
           ZM-R5860 Specifications 
 
A total power of 4800W 
upper heating power 800W 
the second temperature lower heating power 1200W, the third (IR) temperature 2700W 
Power AC220V ± 10% 50/60Hz 
dimensions 630 × 650 × 690mm 
V-shaped positioning slot, PCB stent X, Y in any direction to adjust and configure the universal fixture
K-type thermocouple temperature control (K Sensor) closed-loop control, independent temperature control, accuracy up to ± 3 degrees; 
PCB dimensions Max 410 × 370mm Min 20 × 20 mm 
selection of highly sensitive temperature control module electrical Delta PLC + Taiwan + touch screen 
Weight 85kg 
  
   
ZM-R5860 Performance and Characteristics 

using a linear slide so that X, Y, Z axis fine tuning can be done or rapid positioning movements
 with high accuracy and quick maneuverability. 
the aircraft used in Taiwan high-definition touch screen, PLC controls,
users can store multiple sets of temperature curve data.
Boot password protection and modification work the way a curve of temperature data in response to a touch screen display,
with an instant curve analysis function. 
with three independent heating temperature, the upper and lower temperature hot air heating,
the bottom temperature infrared heating, precise temperature control within ± 3 degrees,
 the upper temperature zone to move freely as needed, the second temperature can be adjusted up and down,
 top and bottom heater can also set the multi-stage temperature control.
 IR preheating Available as per requirement to adjust the output power. 
the hot air nozzle can be rotated 360 °. The bottom of the PCB board infrared heaters can heat evenly. 
the selection of high-precision K-type thermocouple loop control,
external temperature measurement interface to the temperature of the precision test.
PCB board positioning using V-shaped groove, flexible and convenient removable fixture
on the PCB board has protective effects against PCB PCB edge of the device damage and deformation,
and can adapt to rework BGA package size. 
using high-power cross-flow fan to cool quickly PCB board to improve efficiency.
And built-in vacuum pump, an external vacuum suction pen, convenient and quick to take hold BGA chips. 
the welding work is completed with alarm function, as a user with special added "early warning" function. 
the machine through the CE certification, with emergency stop switch and automatic power-off protection device abnormal incidents.
 In case the temperature control circuit can automatically power off with a double over-temperature protection
 
 
 
  
 
Specifications
 
liner slide desgin,HD touch screen,PLC control6, 6Imported IR heater kinds of nozzles,Imported K-type thermocouple, alarm remind
Welding motherboard repair machine ZM-R5880
1: Liner slide makes X,Y axis do precision adjustment or fast positioning.
2: High definition touch screen, PCL control save multiple groups profiles, password protection and modify function, equipped with instant temperature curve analysis function.
3: 3 independent heatering areas from to bottom,
1st and 2nd hot-airs, 3 rd IR PCB preheating zones, top heater can adjust freely,
second heater can do up or down adjust,many groups sections of temperatrue parameters at the same time,
3rd IR preheating plate from germany, and its Power consumption adjustable.
4: Offer kinds of hot-air nozzle with rotation 360degee, magnet design easy to install or replace.
5: Imported K-type thermocouple, closed loop control, automatic temperature compensation system.
6: V-groove equipped with flexible fixture, ensure PCB away from deformation while soldering or desoldering.
7: Alarm sound as soon as soldering or desoldering finished
8: CE,emergency stop and automatic power-off protection device, double over-heating protections control.
9: manual positioning with skillful operator.
10: NW:50KG  Dimensions: 640*710*680MM
 
 
Power consumption
4800w
Top heater
800w
Bottm heatet
2700w, 3rd Temperature Zone (Infrared plates)
1200w, 2nd Temperature Zone
Power Requirement
AC 220V ± 10 50Hz ± 3
Machine Dimension
630x650x690 mm
Positioning
V-groove, PCB support can be adjusted in any direction with external universal fixture
Temperature control
(K Sensor) closed loop, independent heating, precision within ±3°
Max. PCB size
Max 410×370mm Min 20×20 mm
Net weight
40kg
 
 
 
 
 
 
 
ReworkPro Support Team

Torna a “ZM”